|
|
|
|
|
|
|
|
230 V AC on UPS mode, Default Setting
|
|
|
|
|
|
|
|
|
Settable for handling motor Loads
|
|
|
Auto restart on over load.
|
|
|
Soft regulation increases backup in hard mode regulation is +/- 2% of set point
|
|
|
Programmable, separate range for computers.
|
|
Start/stop and alarm reset
|
Same switch can be used to also reset alarm
|
|
|
For computer applications select fast mode. In fast mode transfer is within 4 milli sec.
|
|
Static switch* (Optional)
|
|
|
|
|
|
|
|
|
Number of time battery discharged till warning and number of times battery charged
|
|
|
Useful for post fault analysis
|
|
Unique protection schemes have been Incorporated to enhance readability
|
|
In the event of phase voltage wrongly connected to the inverter output safe shut down will occur
|
|
In the event of overload system will shut down and restart 5 times
|
Short circuit (Batt Mode)
|
A short circuit on the output will be detected separately and lead to lock down.
|
|
Excessive temperature rise due to poor cooling or fan failure will cause shut down
|
|
The system detects the number of charge and discharge cycles. In case the battery not getting adequate charge and is repeatedly being discharged affecting its life the system will lock down
|
|
Sparking or spikes on the dc bus will cause safe shut down and lock down.
|
|
Soft current builds up in case of deep discharge battery
|
|
In event a cell is dead or shorted a time out circuit will prevent prolonged charging.
|
In order to provide enhanced flexibility for the wide range of applications many features in the card are for the wide definable at your end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 separate audio ring tones
|
are generated: Reset, DC high / battery
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
System faults (Dc high; Batt.
|
|
|
|
Output Faults (Phase reverse;
|
Short; Overload; Output low)
|
|
Available in LCD and LED indicators.
|
|
|